Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Support Struts

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Body

In the next video, a guide will illustrate, in a few steps, a quick and simple operation that can be done at home, which involves replacing the tailgate support struts. All you need to do is open the tailgate and remove the old struts from their mounts. Then, insert the new ones: press gently until you hear a "click". This indicates that it is securely locked. If you wish to change the other strut, you can repeat the same operation. An obvious but important recommendation is to replace them one at a time.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the inner panel of the rear hatch of the Mini Cooper
How to remove the inner panel of the rear hatch of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the Mini Cooper. First, op…
How to replace the rear hatch button of the Mini Cooper.
How to replace the rear hatch button of the Mini Cooper.
Mini (2001-2007 / R53, R50, R52) In this video tutorial, we will see how to disassemble and replace, or repair, the rear door button of the Mini Cooper, in simple and quick steps. Fi…
Replacing Hydraulic Pistons
Replacing Hydraulic Pistons
Mini (2007-2014 / R55, R57, R56) As the first step, release the bonnet from the appropriate lever and then lift it. Before working on the hydraulic pistons, it is advisable to suppor…

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos