Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to replace the front directional bulb

Mini - Video tutorial

Model: Mini Mini R55, R56, R57 - Years 2007-2014
Part: Light bulb
Operation: How to replace the front directional bulb

In the following video we will learn how to replace the front directional bulb. It is a very simple procedure and first of all you need to open the hood and disconnect the negative cables. We will then proceed to unscrew all the bolts that secure the light, then we will remove it making sure to pull off the locking cables. Then we will unscrew the cap located on the back of the light to access the bulbs, then we will extract the one we are interested in and replace it with a new one. We will close and conclude by reassembling the light on the car and reconnecting the negative cables that we had previously disconnected.


Posted on 25 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2010-2016 - What does the EML warning light on the Mini Cooper indicate? Read Answer
    • Mini 2017-2023 - How do you replace the brake light bulb on the 2017 Mini? Read Answer
    • Mini 2014-2023 - What bulbs does the Mini Cooper have? Read Answer
    • Mini 2007-2014 - How much does a Mini Cooper reverse light bulb cost? Read Answer
    • Mini 2010-2016 - Spy with exclamation mark on Mini car? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos