Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the oil light of the Mini Cooper

Model: Mini Mini F55, F54, F57, F56 - Years 2014-2023
Part: Service warning light

In the following article, we will see how to reset the oil light of the Mini Cooper after changing the oil and filter in case the light is not automatically reset by the ECU. To perform this operation, no tools are needed and the procedure takes less than 1 minute to complete. To carry out the following operation, first start the ignition, then press and hold the button on the dashboard for 5 seconds to access the service menu. After 5 seconds, the maintenance light will appear. Press and hold the button again until the word RESET? appears below the light. Release and press the button again while holding it down to reset. Wait for the reset procedure to finish, then release the button and restart the ignition. The procedure is now complete.

Posted on 25 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Mini (2007-2014 / R57, R55, R56) Today we will see the procedure for resetting the Mini Cooper oil change routine maintenance service light. First of all we get on board the car and …
Mini (2001-2007 / R52, R50, R53) If the tire pressure warning light on your Mini Cooper R52 continues to stay on constantly on the instrument panel and you want to manually reset it,…
Mini (2010-2016 / R60, Countryman1) In this tutorial we can see how to reset the tire warning light on the Mini Cooper, a very simple and quick operation, to be performed only after res…

Fuse Replacement on Fiat Grande Punto

Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in the front dashboard (you will find the fuses there). You will also find fuses in the engine compartment: open the front bonnet and remove the cover near the battery using a plastic lever. Use pliers to disconnect the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Close the fuse inspection box with the cover.

Watch the video!


by ScegliAuto

More videos