Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : License plate light

Mitsubishi Outlander - License plate light

License Plate Light Mitsubishi Outlander (2013-2021 / mk 3)

Mitsubishi Outlander (2013-2021 / MK 3)
How to change the license plate light bulb of a Mitsubishi Outlander
Through this video tutorial, we can see step by step how to change the license plate light bulb of a Mitsubishi Outlander, third series model produced from …Read all…
Posted on 14 June 2025 by ScegliAuto
Mitsubishi Outlander (2013-2021 / MK 3)
Replacing the Number Plate Bulbs on a Mitsubishi Outlander
This guide outlines the main steps to remove and replace the number plate bulbs on a Mitsubishi Outlander. First, move to the rear of the vehicle and start …Read all…
Posted on 13 July 2026 by ScegliAuto
Alternator (1) Shocks (1) Antenna (1) Car stereo (10) Anti-roll bar (1) Battery (4) Control arm (1) Spark plugs (3) Body (1) Glove compartment (1) Key (17) Onboard computer (7) Checks and maintenance (10) Dashboard (1) CV boot (1) Bearing (1) Brake rotors (4) Headlight (1) Tail light (2) Air filter (7) Cabin air filter (4) Diesel fuel filter (3) Accessory kit (1) Side marker bulb (1) Headlight bulb (8) License plate light (2) Handle (2) Engine oil (2) Clock (18) Door trim panel (3) Front bumper (1) Rear bumper (2) Tires (2) Shift knob (1) Instrument cluster (1) Wheel (2) Fuse box (21) Axle shaft (1) Suspension system (1) Side mirror (2) Warning light – error code (11) (27) Tire pressure warning light (10) Service warning light (116) Fuel cap (1) Drivetrain (1) Blower motor (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos