Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : Rear bumper

Mitsubishi Outlander - Rear bumper

Rear Bumper Mitsubishi Outlander (2013-2021 / mk 3)

Mitsubishi Outlander (2013-2021 / MK 3)
How to Replace the Rear Bumper on a Mitsubishi Outlander?
To replace the rear bumper on a Mitsubishi Outlander, unscrew the screws that secure it to its housing. These screws are located at the central lower part of …Read all…
Posted on 17 August 2026 by ScegliAuto
Mitsubishi Outlander (2013-2021 / MK 3)
Instructions for Removing the Rear Bumper of a Mitsubishi Outlander
In today's tutorial, you will learn how to remove the rear bumper of a 2014 Mitsubishi Outlander, second series. First, open the boot and lift the floor by …Read all…
Posted on 17 June 2026 by ScegliAuto
Alternator (1) Shocks (1) Antenna (1) Car stereo (10) Anti-roll bar (1) Battery (4) Control arm (1) Spark plugs (3) Body (1) Glove compartment (1) Key (17) Onboard computer (7) Checks and maintenance (10) Dashboard (1) CV boot (1) Bearing (1) Brake rotors (4) Headlight (1) Tail light (2) Air filter (7) Cabin air filter (4) Diesel fuel filter (3) Accessory kit (1) Side marker bulb (1) Headlight bulb (8) License plate light (2) Handle (2) Engine oil (2) Clock (18) Door trim panel (3) Front bumper (1) Rear bumper (2) Tires (2) Shift knob (1) Instrument cluster (1) Wheel (2) Fuse box (21) Axle shaft (1) Suspension system (1) Side mirror (2) Warning light – error code (11) (27) Tire pressure warning light (10) Service warning light (116) Fuel cap (1) Drivetrain (1) Blower motor (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos