Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : Mitsubishi Outlander rear bumper removal instructions

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Rear bumper
Operation: Mitsubishi Outlander rear bumper removal instructions

In today's video tutorial we will see how to remove the rear bumper of a 2014 Mitsubishi Outlander, second series. First of all, we open the boot lid and lift the floor, unscrewing the fixing screws that we find underneath; then we unscrew the side screws and remove the plastic panel. At this point we unscrew all the screws that we find at the bottom of the bumper and those fixing the lights, disconnecting the electrical connectors and removing them; we just have to unscrew the side screws of the fenders and remove the bumper, as shown in the video!


Posted on 22 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Outlander 2013-2021 - How to remove the rear bumper from a Mitsubishi Outlander? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos