Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight from Mitsubishi Outlander

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Tail light

Let's see how to remove the rear headlight of the Mitsubishi Outlander. Lift the rear boot to access the inside of the boot space, then find the screws at the top. Unscrew the securing screws located at the side of the rear headlight; once the rear headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the headlight and any damaged bulbs with identical parts of the same size and voltage. Secure the rear headlight with the screws on the sides. Finally, turn on the lights and check the operation.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Mitsubishi Outlander
Replacement of the front headlight bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) These brief instructions will show us how to disassemble and replace the headlight bulb of the Mitsubishi Outlander. First, we open the hood of the c…
How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replacing the right front headlight bulb on a Mitsubishi Outlander follows short and simple steps that you can carry out independently, thanks to our…
Replacing the Front Headlight Bulb on Mitsubishi Outlander
Replacing the Front Headlight Bulb on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) In this video, you will see how to remove and replace the front headlight bulbs on a second-generation Mitsubishi Outlander. Open and lift the bonnet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos