Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Headlight bulb

These brief instructions will show us how to disassemble and replace the headlight bulb of the Mitsubishi Outlander. First, we open the hood of the car and start removing the plastic cover protecting the bulbs; then we disconnect the electrical connector of the light and unhook it from the bulb holder to remove it, as shown in the video. At this point, we replace and install the new low beam bulb, of the correct type and with the same fitting; we securely attach the bulb to the bulb holder and, if necessary, adjust the headlight.

Posted on 3 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Mitsubishi Outlander
How to replace the front headlight bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) .. see information regarding the disassembly and replacement of the front headlight bulb of the Mitsubishi Outlander. First, we open the hood of the car.. …
How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replacing the right front headlight bulb on a Mitsubishi Outlander follows short and simple steps that you can carry out independently, thanks to our…
Replacing the Front Headlight Bulb on Mitsubishi Outlander
Replacing the Front Headlight Bulb on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) In this video, you will see how to remove and replace the front headlight bulbs on a second-generation Mitsubishi Outlander. Open and lift the bonnet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos