Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior and Boot Light Bulb of the Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

Today's guide will show you how to disassemble and replace the interior light bulb and the boot light bulb of the Mitsubishi Lancer. First, get inside the vehicle and remove the plastic cover of the interior light.

Then, take out the small bulb inside and replace it with a new one, as illustrated in the video. Now, open the tailgate and perform the same operation to replace the boot light bulb; remove the small bulb and install a new one of the same wattage.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Mitsubishi Lancer (2000-2006 / MK 8) Today we will go through the steps that will allow us to disassemble and replace the rear light and its bulbs on the Mitsubishi Lancer. First, let's …
How to Replace the Wheel on a Mitsubishi Lancer
How to Replace the Wheel on a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) In this video tutorial, see how to remove and replace the wheel with the spare (or space-saver) on a third-generation Mitsubishi Lancer. First, open …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos