Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wheel on a Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Wheel

In this video tutorial, see how to remove and replace the wheel with the spare (or space-saver) on a third-generation Mitsubishi Lancer. First, open the boot and lift the first compartment to access the spare wheel and the jack. Next, loosen the wheel bolts and lift the vehicle at the designated jacking point (which is indicated in the owner's manual). Once raised, finish unscrewing the bolts and remove the wheel; then replace it with the spare or space-saver!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
Mitsubishi Lancer (2007-2020 / MK 9) To replace the rear brake pads on the Mitsubishi Lancer, lift the car so that the corresponding rear wheel is not in contact with the ground. At this…
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos