Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the rear brake pads on the Mitsubishi Lancer, lift the car so that the corresponding rear wheel is not in contact with the ground. At this point, you can unscrew the bolts that secure the wheel to its hub to access the disc at the back: remove the caliper by unscrewing the fixing bolts.

This will allow you to extract the pads from inside, replacing them with new spare parts; then, remount all the components that were previously removed.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Mitsubishi Lancer (2000-2006 / MK 8) Today we will go through the steps that will allow us to disassemble and replace the rear light and its bulbs on the Mitsubishi Lancer. First, let's …
How to Remove the Rear Bumper of a Mitsubishi Lancer
How to Remove the Rear Bumper of a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Below are the steps to remove and replace the rear bumper of a Mitsubishi Lancer. First, open the boot and start unscrewing all the fixing screws fou…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos