Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light and its bulbs for the Mitsubishi Lancer.

Model: Mitsubishi Lancer MK 8 - Years 2000-2006
Part: Tail light

Today we will go through the steps that will allow us to disassemble and replace the rear light and its bulbs on the Mitsubishi Lancer. First, let's open the rear hatch of the vehicle and start unscrewing the fastening screws located on the side of the headlight; then we will disconnect the electrical connector for the lights located at the back, as shown in the video. At this point, we will replace any faulty bulbs with new ones, or we will replace the entire rear light; we will connect and reassemble the new light, checking the operation of all the brake lights.

Posted on 3 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Mitsubishi Lancer
How to replace the rear headlight bulb of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If one of the bulbs in the rear light of your Mitsubishi Lancer has stopped working and you want to find out how to replace it yourself, then all you…
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
How to replace the headlight bulb in the 2008 Mitsubishi Lancer
How to replace the headlight bulb in the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the headlight bulb in your 2008 Mitsubishi Lancer is undoubtedly one of the simplest and safest DIY operations to perform. With the followi…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos