Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

Below are the steps to remove and replace the rear bumper of a Mitsubishi Lancer. First, open the boot and start unscrewing all the fixing screws found at the top of the bumper, also removing those located on both sides of the rear wheel arches.

Then, gently unclip the bumper from the sides until it is completely removed, as shown in the video. At this point, if necessary, replace the rear bumper with the new one, securing it properly on the sides and at the top with the screws.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Mitsubishi Lancer?
How to Remove the Rear Bumper of the Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) In this tutorial, you will see how to remove the rear bumper of the Mitsubishi Lancer, a very simple task. To do this, you will need a set of screwdr…
How to Remove the Front Bumper of the Mitsubishi Lancer
How to Remove the Front Bumper of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Today's instructions will show you how to remove and replace the front bumper of the Mitsubishi Lancer, following the steps outlined below. First, op…
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Replacement of the rear light and its bulbs for the Mitsubishi Lancer.
Mitsubishi Lancer (2000-2006 / MK 8) Today we will go through the steps that will allow us to disassemble and replace the rear light and its bulbs on the Mitsubishi Lancer. First, let's …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos