Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Bumper

Model: Mitsubishi Lancer MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper, start by opening the boot and removing the rear lights (there are two fixing screws along the inner edge); disconnect the side reflectors by releasing their connectors; remove the plastic cover from the scuff plate and proceed to remove the fixing pins of the bumper along the bonnet closure line; then unscrew the screws along the wheel arch and the one fixing it to the wing.

At this point, you can detach and remove the bumper after disconnecting the number plate light connector.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Mitsubishi Lancer (2007-2020 / MK 9) To remove the original car radio, first remove the central trim of the dashboard: open the glove compartment and, pressing on the side edges, flip it…
Dismantling Front Bumper and Headlight
Dismantling Front Bumper and Headlight
Mitsubishi Lancer (2000-2006 / MK 8) To dismantle the front bumper, start by opening the bonnet and unscrewing the bolts that secure the bumper to the grille; then remove the caps near t…
How to Remove the Front Bumper of the Mitsubishi Lancer
How to Remove the Front Bumper of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Today's instructions will show you how to remove and replace the front bumper of the Mitsubishi Lancer, following the steps outlined below. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos