Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

To remove the original car radio, first remove the central trim of the dashboard: open the glove compartment and, pressing on the side edges, flip it downwards; then detach the side cover on the edge of the glove compartment (on the door side) to access the screw securing the trim.

At this point, you can unclip it and proceed to remove the car radio, which is simply clipped in: pull out the entire dashboard section including the car radio and the air vents, disconnecting the connectors attached to it.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
Mitsubishi Lancer (2000-2006 / MK 8) To remove the rear bumper, start by opening the boot and removing the rear lights (there are two fixing screws along the inner edge); disconnect the …
Instructions for Removing the Third Brake Light
Instructions for Removing the Third Brake Light
Mitsubishi Lancer (2007-2020 / MK 9) To remove the third brake light fitted to the tailgate, first remove the sound-absorbing carpet lining by disengaging the relevant pressure fasteners…
Using the AUX Input on Car Radios
Using the AUX Input on Car Radios
Mitsubishi Lancer (2007-2020 / MK 9) Almost all cars are now equipped with multimedia systems featuring an auxiliary input known as AUX: you can connect your mobile phone to this socket …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos