Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Box in a Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Glove compartment

Removing the glove box only requires a screwdriver and is not particularly complicated. This operation, due to its simplicity, can be performed by anyone at any time. The only tool needed to remove the glove box is a screwdriver to unscrew the five screws that act as fasteners. Once these are removed, extracting the glove box is easy; just pull it out. Removing the glove box allows access to the pollen filter and other components located behind it.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel of the Mitsubishi Colt
How to disassemble the door panel of the Mitsubishi Colt
Mitsubishi Colt (1995-2002 / CJO) Below we will see the instructions that will allow us to disassemble and remove the door panel of the Mitsubishi Colt, in simple steps. First, we ope…
How to Remove the Door Panel of the Mitsubishi Colt?
How to Remove the Door Panel of the Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) To remove the door panel of the Mitsubishi Colt, loosen all the screws that secure the panel to its housing: the screws are located at the central lo…
Localization and fuse diagram of the Mitsubishi Colt 2012.
Localization and fuse diagram of the Mitsubishi Colt 2012.
Mitsubishi Colt (2004-2012 / MK 1, Z30) We see the location and diagram of the fuse box of the 2012 Mitsubishi Colt: the fuse box inside the passenger compartment is located at the bottom o…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos