Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Colt
  6. : How do you remove the Mitsubishi Colt door panel?

Mitsubishi Colt - Video tutorial

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Door panel
Operation: How do you remove the Mitsubishi Colt door panel?

In order to remove the door panel from the Mitsubishi Colt, you need to loosen all the screws that fix this panel to its housing: its screws will be found in the lower central part of the panel, near the central handrail of the door and in the seat of the internal handle. Once all these screws have been loosened, it will be possible to detach the panel from its housing, so that the connectors in the rear part are disconnected. At this point it will be possible to remove the panel, replacing it with a new spare part.


Posted on 27 December 2022 by ScegliAuto

Other guides that may interest you

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos