Do it yourself
| ||||
|
Mitsubishi Colt - Video tutorial
Model: Mitsubishi Colt
Z30, MK 1
- Years 2004-2012 In order to replace the door panel of the Mitsubishi Colt you have to unscrew the screw located in the seat of the internal handle, covered by the special plastic cap. It will also be necessary to unscrew the screws located under the door handle and in the lower part of the panel. When all these screws have been removed, it will be possible to go and detach the panel, also disconnecting all the connectors inside. In this way it will be possible to connect the new panel with the connectors inside and fix it using the special screws removed previously.
Posted on 11 May 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |