Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Handle on a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Handle

See other generations:
Video tutorial

In this video tutorial, follow the main instructions to remove and replace the external handle of the tailgate on a Mitsubishi Pajero. First, open the tailgate and begin removing the interior panel or trim; then, unscrew the lower fixing screws of the tailgate handle to remove it, as shown in the video.

At this point, install the new external handle, securing it properly; check its operation before reassembling the tailgate trim!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Tailgate Panel of the Mitsubishi Pajero - Montero
How to Remove the Rear Tailgate Panel of the Mitsubishi Pajero - Montero
Mitsubishi Pajero (2006-2021 / V80, MK 4) In this video tutorial, you will see the steps to remove and replace the plastic panel of the rear tailgate of the Mitsubishi Pajero and Montero. Fir…
Removing Door Panel on Mitsubishi Pajero
Removing Door Panel on Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Removing the door panel on a Mitsubishi Pajero? Here’s how to remove it from the right door. Using a screwdriver, unscrew the screws located in the s…
How to Remove the Fuel Tank Filter on a Mitsubishi Pajero
How to Remove the Fuel Tank Filter on a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) This video shows how to remove the fuel tank filter on a Mitsubishi Pajero. Lift the boot lid and secure it, then remove the lower panel inside. Use …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos