Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Tailgate Panel of the Mitsubishi Pajero - Montero

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will see the steps to remove and replace the plastic panel of the rear tailgate of the Mitsubishi Pajero and Montero. First, open the rear tailgate and start by removing the side plastic trims of the tailgate.

Then, lever the sides of the panel to detach and remove it, as shown in the video. At this point, you can access the boot lock, replacing it if necessary; then refit the rear tailgate panel by applying the reverse procedure!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Mitsubishi Pajero (2006-2021 / V80, MK 4) .. steps to lower the rear seats of the Mitsubishi Montero, as well as the Pajero. First, open the tailgate of the boot and start lowering the backrests.. …
Mitsubishi Pajero (1999-2006 / V60, MK 3) In this video tutorial, follow the main instructions to remove and replace the external handle of the tailgate on a Mitsubishi Pajero. First, open th…
Mitsubishi Pajero (1991-1999 / MK 2, V20) .. the fuse boxes are located in the Mitsubishi Montero (known in Europe as Pajero) in its first version: the cabin fuse box is found at the lower part.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos