Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outer Handle on a Mitsubishi Freeca

Model: Mitsubishi Freeca MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

Video tutorial

To replace the outer opening handle of the vehicle, proceed as follows: First, remove the plastic cover located under the inner opening handle, which is secured with a screw. Then, remove the inner door panel by detaching the clips that hold it and after removing the armrest.

Unscrew the screws that secure the outer handle from the inside and pull it out from the outside, disconnecting the cable located behind it. Then, position the new handle and reconnect the opening cable. Finally, reassemble the door panels.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel and Handles on a Mitsubishi Freeca or Adventure
How to Remove the Door Panel and Handles on a Mitsubishi Freeca or Adventure
Mitsubishi Freeca (1997-2017 / MK 1) This guide shows how to remove the door panel and handles on a Mitsubishi Freeca or Adventure. Using a Phillips screwdriver, unscrew the fastening sc…
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) In this tutorial, see how to replace the tail light bulbs in a Mitsubishi Freeca, also marketed as Adventure. First, ensure the key is not in the ign…
How to Replace the Fuel Filter on a Mitsubishi Freeca?
How to Replace the Fuel Filter on a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the fuel filter on a Mitsubishi Freeca, open the hood to access the components inside the engine bay: on the right side, you will find the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos