Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Handles on a Mitsubishi Freeca or Adventure

Model: Mitsubishi Freeca MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

Video tutorial

This guide shows how to remove the door panel and handles on a Mitsubishi Freeca or Adventure. Using a Phillips screwdriver, unscrew the fastening screws of the panel located in the recess of the lock handle and in the armrest handle, removing the cover of the handle and armrest; disconnect the power connector for the window lift.

Remove the lock release knob by unscrewing it. Remove the triangular trim piece of the mirror. At this point, detach the panel from the door starting from the bottom; disconnect the electrical connectors and remove the element.

Remove the insulating sheet and unscrew the bolts of the outer handle, then pull it out from the door. Reassemble everything in position and check the proper functioning of the lock.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Mitsubishi Adventure - Freeca
How to Replace the Front Wipers on the Mitsubishi Adventure - Freeca
Mitsubishi Freeca (1997-2017 / MK 1) In this video tutorial, follow the step-by-step instructions to remove and replace the front wipers on the Mitsubishi Adventure and Freeca. First, mo…
How to Wash the Engine of the Mitsubishi Freeca/Adventure
How to Wash the Engine of the Mitsubishi Freeca/Adventure
Mitsubishi Freeca (1997-2017 / MK 1) In this video, see how to wash the engine of the Mitsubishi Freeca (or Adventure, the name changes depending on the country where it is sold). You ca…
How to Replace the Door Handle on a Mitsubishi Freeca?
How to Replace the Door Handle on a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) If the door handle breaks, you can replace it by following these steps: first, remove the door panel. Use a flat screwdriver to pry around the panel …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos