Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?

Model: Mitsubishi Freeca MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

Video tutorial

In this tutorial, see how to replace the tail light bulbs in a Mitsubishi Freeca, also marketed as Adventure. First, ensure the key is not in the ignition, then open the trunk and unscrew the two bolts along the inner edge of the light.

Next, grasp the light, remove it from the body, and extract the bulb to be replaced by turning the socket counterclockwise. Follow the reverse procedure to reassemble everything and avoid touching the replacement bulb with bare hands.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Tail Light Bulb on the Mitsubishi Freeca?
How to Replace the Tail Light Bulb on the Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the tail light bulb on the Mitsubishi Freeca, open the rear hatch to access the screws located next to the corresponding tail light. These…
How to Replace the Headlight Bulb on a Mitsubishi Freeca
How to Replace the Headlight Bulb on a Mitsubishi Freeca
Mitsubishi Freeca (1997-2017 / MK 1) If you need to replace the headlight bulb on this vehicle, follow the instructions below to perform the replacement correctly. Once you remove the fr…
How to Replace the Fuel Filter on a Mitsubishi Freeca?
How to Replace the Fuel Filter on a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the fuel filter on a Mitsubishi Freeca, open the hood to access the components inside the engine bay: on the right side, you will find the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos