Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Freeca
    4. : How do you replace the rear headlight bulb of the Mitsubishi Freeca?

Mitsubishi Freeca - Video tutorial

Model: Mitsubishi Freeca MK 1 - Years 1997-2017
Part: Rear light bulb
Operation: How do you replace the rear headlight bulb of the Mitsubishi Freeca?

To replace the rear headlight bulb of the Mitsubishi Freeca, you need to open the rear hatch so that you have access to the screws next to the corresponding rear headlight. These screws need to be loosened so that the headlight can be removed from its housing, disconnecting the connectors on its rear side. This will allow you to remove the bulb from inside the corresponding headlight and replace it with a new one. The new bulb needs to be connected to the connector, inserted into the headlight, and then the headlight needs to be secured with the appropriate screws.


Posted on 28 May 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos