Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Mitsubishi Colt.

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Mitsubishi Colt. First, we open the rear door of the trunk and start unscrewing the fixing screws of the tail light, disconnecting the electrical connector to remove it; then we separate the bulb holder from the light fixture, thus accessing all the stop lights, as shown in the video.

At this point, we replace any faulty bulbs with new ones, of the correct type and with the same fitting; finally, we reassemble and connect the stop light.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

Where is the fuse box located in the 2009 Mitsubishi Colt?
Where is the fuse box located in the 2009 Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) Knowing the exact location of the fuse box in your 2009 Mitsubishi Colt is very important as it allows you to address various fuses in a targeted, sa…
How to replace the external rearview mirror of the Mitsubishi Colt.
How to replace the external rearview mirror of the Mitsubishi Colt.
Mitsubishi Colt (2004-2012 / MK 1, Z30) We will briefly discover the instructions on how to disassemble and replace the external rearview mirror of the Mitsubishi Colt. First, let's open th…
Replacing the Battery of the Mitsubishi Colt
Replacing the Battery of the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) This guide outlines the steps to remove and replace the battery of the Mitsubishi Colt. First, open the bonnet by pulling the lever from inside, and …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos