Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Boot Light Bulb

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Light bulb

To replace the bulb that illuminates the boot, open the rear hatch and locate the lamp holder situated just below the metal crossmember, directly in line with the parcel shelf holder; then disconnect the power plug and subsequently remove the lamp holder complete with bulb (it is a type of tubular bulb); then fit the new bulb and reverse the process for installation; you may also opt for an LED bulb: check that it lights up, otherwise rotate it 180 degrees.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2000-2006 / MK 8) Replacing the original incandescent bulbs with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility. …
Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2007-2020 / MK 9) Before proceeding with the installation of the LED bulbs, obtain a plastic spatula to detach the light fittings without damaging them; use the spatul…
How to Replace the Interior and Boot Light Bulb of the Mitsubishi Lancer
How to Replace the Interior and Boot Light Bulb of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Today's guide will show you how to disassemble and replace the interior light bulb and the boot light bulb of the Mitsubishi Lancer. First, get insid…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos