Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light Bulb

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Interior dome light bulb

See other generations:
Video tutorial

Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture sideways to detach it (apply masking tape to the tip of the screwdriver) and access the bulb holder, then extract the old bulb (the type with a torpedo shape) and insert the new one, check its correct operation, and reposition the cover glass.

You might opt for the installation of LED bulbs that give the interior a more modern and appealing look: if it does not light up, reverse the polarity of the bulb.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacement of Interior Light Bulb
Replacement of Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the interior light bulb, simply detach the transparent cover of the light fitting without removing it from the headlining; take care not t…
Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2000-2006 / MK 8) Replacing the original incandescent bulbs with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility. …
Replacing a Faulty Front Headlamp Bulb
Replacing a Faulty Front Headlamp Bulb
Mitsubishi Lancer (2007-2020 / MK 9) It can happen that a bulb blows, and in that case, you need to replace it without necessarily seeking the help of an electrician. This guide shows ho…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos