Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Mitsubishi Lancer MK 8 - Years 2000-2006
Part: Accessory kit

Replacing the original incandescent bulbs with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility. Start with the ceiling light by disengaging it using a plastic spatula to access the bulb holder and replace the bulb. Next, access the boot to replace the number plate light bulbs (T10 fitting), the reverse light bulbs which require removing the rear lamp, and finally, change the boot light as well.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2007-2020 / MK 9) Before proceeding with the installation of the LED bulbs, obtain a plastic spatula to detach the light fittings without damaging them; use the spatul…
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture s…
Replacement of Interior Light Bulb
Replacement of Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the interior light bulb, simply detach the transparent cover of the light fitting without removing it from the headlining; take care not t…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos