Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Accessory kit

See other generations:
Video tutorial

Before proceeding with the installation of the LED bulbs, obtain a plastic spatula to detach the light fittings without damaging them; use the spatula to release the cover of the light fitting and access the bulb holder for bulb replacement (bayonet fitting); also replace the one in the boot; to replace the number plate lights, it is necessary to remove the soundproofing panel from under the tailgate to access the respective bulb holders.

If a bulb does not light up, rotate it in the bulb holder by 180 degrees.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2000-2006 / MK 8) Replacing the original incandescent bulbs with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility. …
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture s…
Replacement of Interior Light Bulb
Replacement of Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the interior light bulb, simply detach the transparent cover of the light fitting without removing it from the headlining; take care not t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos