Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Faulty Front Headlamp Bulb

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

It can happen that a bulb blows, and in that case, you need to replace it without necessarily seeking the help of an electrician. This guide shows how to proceed with the replacement correctly.

Once you have a new bulb, work on replacing it. After removing the faulty bulb, open the bonnet and you will notice two screws and a tab; unscrew them and pull the tab so that the headlamp protrudes slightly to create some space for the bulb replacement.

Next, unscrew the cap connected to the socket and the bulb itself, disconnect it, and replace it with a new, functioning one.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb in the 2008 Mitsubishi Lancer
How to replace the headlight bulb in the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the headlight bulb in your 2008 Mitsubishi Lancer is undoubtedly one of the simplest and safest DIY operations to perform. With the followi…
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the rear headlamp bulb, it is not necessary to remove the headlamp itself, but this operation does require the removal of the sound-absorb…
Replacement of Front Indicator Bulb
Replacement of Front Indicator Bulb
Mitsubishi Lancer (2007-2020 / MK 9) The front indicator on the car model in question is integrated into the headlamp and is located at the inner edge of the headlamp, near the grille. T…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos