Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Indicator Bulb

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Headlight bulb

The front indicator on the car model in question is integrated into the headlamp and is located at the inner edge of the headlamp, near the grille. To access the bulb holder, first remove the plastic cover from the bonnet latch panel. Then, remove the plastic expansion clips by extracting the central pin and then the clip itself. Once all clips are removed, unscrew the two plastic screws that secure the intake duct opening and complete the removal of the plastic trim. At this point, you can access the indicator housing, release the bulb holder by twisting it, and then replace the bulb (T10 fitting).

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture s…
Replacement of Interior Light Bulb
Replacement of Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the interior light bulb, simply detach the transparent cover of the light fitting without removing it from the headlining; take care not t…
Replacing a Faulty Front Headlamp Bulb
Replacing a Faulty Front Headlamp Bulb
Mitsubishi Lancer (2007-2020 / MK 9) It can happen that a bulb blows, and in that case, you need to replace it without necessarily seeking the help of an electrician. This guide shows ho…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos