Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp Bulb

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Tail light bulb

To replace the rear headlamp bulb, it is not necessary to remove the headlamp itself, but this operation does require the removal of the sound-absorbing cover beneath the rear hatch by extracting the relevant pressure clips. Once the cover is removed, disconnect the bulb holder, extract the old bulb, and insert the new one. It is advisable to check all bulbs in both headlamps, and if any appear blackened, replace them since the cover has already been removed. For the bulbs in the other part of the headlamp, the headlamp itself must be removed by unscrewing the fixing screws inside the bonnet closing line, repeating the same operation with the bulbs.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing a Faulty Front Headlamp Bulb
Replacing a Faulty Front Headlamp Bulb
Mitsubishi Lancer (2007-2020 / MK 9) It can happen that a bulb blows, and in that case, you need to replace it without necessarily seeking the help of an electrician. This guide shows ho…
Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2007-2020 / MK 9) Before proceeding with the installation of the LED bulbs, obtain a plastic spatula to detach the light fittings without damaging them; use the spatul…
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos