Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Lancer
    4. : Light bulb

Mitsubishi Lancer - Light bulb

Light Bulb Mitsubishi Lancer (2007-2020 / mk 9)

Mitsubishi Lancer (2007-2020 / MK 9)
How to Replace the Interior and Boot Light Bulb of the Mitsubishi Lancer
Today's guide will show you how to disassemble and replace the interior light bulb and the boot light bulb of the Mitsubishi Lancer. First, get inside the …Read all…
Posted on 10 September 2026 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
Replacement of Boot Light Bulb
To replace the bulb that illuminates the boot, open the rear hatch and locate the lamp holder situated just below the metal crossmember, directly in line with …Read all…
Posted on 27 February 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (2) Battery (3) Spark plugs (2) Key (2) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (6) Light bulb (2) Headlight bulb (5) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (2) Engine (1) Clock (2) Door trim panel (1) Front bumper (2) Rear bumper (3) Brake pads (1) Shift knob (1) Fuel pump (2) Power window switch (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (6) Suspension system (1) Warning light – error code (4) Tire pressure warning light (4) Service warning light (12) Fuel cap (1) Blower motor (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos