Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mitsubishi Lancer -

Mitsubishi Lancer (2007-2020 / mk 9)

Mitsubishi Lancer (2007-2020 / MK 9)
Instructions for Removing the Third Brake Light
To remove the third brake light fitted to the tailgate, first remove the sound-absorbing carpet lining by disengaging the relevant pressure fasteners. Once you …Read all…
Posted on 23 February 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (2) Battery (3) Spark plugs (2) Key (2) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (6) Light bulb (2) Headlight bulb (5) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (2) Engine (1) Clock (2) Door trim panel (1) Front bumper (2) Rear bumper (3) Brake pads (1) Shift knob (1) Fuel pump (2) Power window switch (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (6) Suspension system (1) Warning light – error code (4) (4) Service warning light (12) Fuel cap (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos