Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Lancer
    4. : Cabin air filter

Mitsubishi Lancer - Cabin air filter

Cabin Air Filter Mitsubishi Lancer (2007-2020 / mk 9)

Mitsubishi Lancer (2000-2006 / MK 8)
How to replace the cabin air filter on a Mitsubishi Lancer?
If you need to replace the cabin air filter on this vehicle, this description will provide the necessary instructions, and you can also refer to the video. …Read all…
Posted on 26 September 2026 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
Cabin Air Filter Replacement
The cabin air filter is located on the passenger side, just behind the access door: to replace it, fully lower the door by disengaging the side stop. Once the …Read all…
Posted on 22 February 2026 by ScegliAuto

Cabin Air Filter Mitsubishi Lancer (2000-2006 / mk 8)

Mitsubishi Lancer (2000-2006 / MK 8)
How to replace the cabin air filter on a Mitsubishi Lancer?
If you need to replace the cabin air filter on this vehicle, this description will provide the necessary instructions, and you can also refer to the video. …Read all…
Posted on 26 September 2026 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
Cabin Air Filter Replacement
The cabin air filter is located on the passenger side, just behind the access door: to replace it, fully lower the door by disengaging the side stop. Once the …Read all…
Posted on 22 February 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (2) Battery (3) Spark plugs (2) Key (2) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (6) Light bulb (2) Headlight bulb (5) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (2) Engine (1) Clock (2) Door trim panel (1) Front bumper (2) Rear bumper (3) Brake pads (1) Shift knob (1) Fuel pump (2) Power window switch (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (6) Suspension system (1) Warning light – error code (4) Tire pressure warning light (4) Service warning light (12) Fuel cap (1) Blower motor (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos