Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just behind the access door: to replace it, fully lower the door by disengaging the side stop. Once the door is lowered and the filter housing is easily accessible, remove the cover and extract the old filter.

Ensure there are no dirt residues inside the filter housing and insert the new filter, respecting the airflow direction, then reposition the cap and the access door. When replacing the cabin air filter, it is always useful to also sanitise the cabin with an appropriate antibacterial spray.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter on a Mitsubishi Lancer?
How to replace the cabin air filter on a Mitsubishi Lancer?
Mitsubishi Lancer (2000-2006 / MK 8) If you need to replace the cabin air filter on this vehicle, this description will provide the necessary instructions, and you can also refer to the …
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the interior light bulb is very simple and does not require special tools; it is sufficient to lever the cover glass of the light fixture s…
How to replace the engine air filter of the Mitsubishi Lancer
How to replace the engine air filter of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) To safely and correctly complete the replacement of the engine air filter in your Mitsubishi Lancer, you must carefully read the following guide and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos