|
Do it yourself
| |||
| ||||
How to Change the Cabin Air Filter on a Mitsubishi ASX
Model: Mitsubishi Asx
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
Let's see how to change the cabin air filter on a Mitsubishi ASX: the vehicle shown in the video has right-hand drive, but aside from the location, nothing changes for left-hand drives: the compartment containing the filter is always behind the glove box. This must be emptied, then the support tabs of the glove box should be bent inward to allow it to drop down (it is not necessary to remove it completely). Behind, you will find a rectangular compartment placed horizontally; open the flap, and behind it, you will find the filter, which you can remove by simply pulling it towards you. Clean the compartment that held the filter with a cloth or a blast of low-pressure compressed air, then insert the new filter, ensuring it is fitted correctly. Close the compartment and then replace the glove box. And there you have it!
Posted on 12 July 2026 by ScegliAuto
Related tutorials
Mitsubishi Asx
(2010-2023 /
MK 1)
Below is the procedure for removing and replacing the cabin air filter in the Mitsubishi ASX. First, get inside the vehicle on the passenger side and…
Mitsubishi Asx
(2010-2023 /
MK 1)
Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
Mitsubishi Asx
(2010-2023 /
MK 1)
If you own a first series Mitsubishi ASX and are wondering how to replace the engine air filter, then all you have to do is read the following guide …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
