Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter in the Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

Below is the procedure for removing and replacing the cabin air filter in the Mitsubishi ASX. First, get inside the vehicle on the passenger side and open the glove compartment; disengage it to lower it completely, thus accessing the pollen filter box, as shown in the video.

Now remove the cover of the air filter box, extracting the cartridge located inside; install and insert the new pollen filter in the correct orientation, then reassemble and secure the glove compartment!


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Mitsubishi ASX
How to replace the air filter of the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) If you own a first series Mitsubishi ASX and are wondering how to replace the engine air filter, then all you have to do is read the following guide …
How to Change the Cabin Air Filter on a Mitsubishi ASX
How to Change the Cabin Air Filter on a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Let's see how to change the cabin air filter on a Mitsubishi ASX: the vehicle shown in the video has right-hand drive, but aside from the location, n…
Replace Engine Oil and Oil Filter on the Mitsubishi ASX
Replace Engine Oil and Oil Filter on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Engine oil and the oil filter must be replaced regularly to ensure the engine operates correctly; here’s how to perform the service on the Mitsubishi…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos