Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Engine Oil and Oil Filter on the Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years 2010-2023
Part: Oil filter

Engine oil and the oil filter must be replaced regularly to ensure the engine operates correctly; here’s how to perform the service on the Mitsubishi ASX. First, raise the vehicle and start unscrewing the oil drain bolt located on the sump using a socket or star spanner; allow it to drain into a container for about ten minutes. At this point, use the appropriate tool to unscrew and remove the oil filter cartridge, replacing it with a new one; then pour in the new engine oil as specified in the owner's manual!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter on a Mitsubishi ASX (Outlander Sport)
Changing the Engine Oil and Oil Filter on a Mitsubishi ASX (Outlander Sport)
Mitsubishi Asx (2010-2023 / MK 1) In this video, we will see how to perform routine maintenance by changing the oil and oil filter on a Mitsubishi ASX (Outlander Sport). First, lift t…
How to reset the engine oil light on the Mitsubishi ASX
How to reset the engine oil light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) After performing the routine maintenance check, it is necessary to reset the service light; let's see the procedure on the Mitsubishi ASX. First, we …
How to reset the oil service on the Mitsubishi ASX?
How to reset the oil service on the Mitsubishi ASX?
Mitsubishi Asx (2010-2023 / MK 1) As seen in this tutorial, resetting the oil service on the Mitsubishi ASX is an extremely simple and quick operation. Before proceeding, ensure you h…

Other guides you may be interested in

    Frequently Asked Questions

    • Asx 2010-2023 - Where is the Mitsubishi Asx oil filter located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos