Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Engine Oil and Oil Filter on a Mitsubishi ASX (Outlander Sport)

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:
Video tutorial

In this video, we will see how to perform routine maintenance by changing the oil and oil filter on a Mitsubishi ASX (Outlander Sport). First, lift the vehicle and remove the oil drain bolt, allowing it to drain into a container for about ten minutes; then proceed to remove the filter, which is located right next to it: unscrew it with the appropriate tool, then replace it with the new one (screwing it in by hand).

Finally, add the new engine oil of the correct type, filling it to the maximum level!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Replace Engine Oil and Oil Filter on the Mitsubishi ASX
Replace Engine Oil and Oil Filter on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Engine oil and the oil filter must be replaced regularly to ensure the engine operates correctly; here’s how to perform the service on the Mitsubishi…
How to Reset the Service Indicator on a Mitsubishi ASX
How to Reset the Service Indicator on a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) In today's video, see how to reset the service interval parameter and consequently turn off the related warning light on the Mitsubishi Outlander Spo…
How to change the filter of the Mitsubishi ASX yourself
How to change the filter of the Mitsubishi ASX yourself
Mitsubishi Asx (2010-2023 / MK 1) To perform the service on the Mitsubishi ASX in an orderly manner, work with the engine cold or warm, on a flat surface, with the car securely suppor…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos