Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter on a Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

If you need to replace the cabin air filter on this vehicle, this description will provide the necessary instructions, and you can also refer to the video. First, access the cabin from the passenger side, open the glove compartment, and detach the support pins to fully remove it. Behind it, you will find the filter housing; to extract it, unscrew the screws securing the cover, then pull it towards you and replace it with the new one, ensuring that the replacement specifications are compatible with the vehicle.

Proceed to re-screw the securing screws and reassemble the glove compartment.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Mitsubishi Lancer
How to replace the engine air filter of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) To safely and correctly complete the replacement of the engine air filter in your Mitsubishi Lancer, you must carefully read the following guide and …
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Mitsubishi Lancer (1995-2000 / MK 7) In this video, you can see where the fuel filter is located in the Mitsubishi Lancer EVO and how to proceed if you need to replace it. As shown, the …
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos