Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

If you want to proceed with a DIY replacement of the air filter on this vehicle, you can find the instructions in this description and refer to the images in the video. First, open the bonnet and locate the box containing the filter, which is situated at the top under the windscreen.

Then disconnect the air pressure sensor connector and unclip the steel pins securing the box cover. Open the cover and remove the filter from its housing.

Take the new filter, which should have the same specifications, and position it in the compartment. Close the cover by securing the steel pins and reconnect the sensor connector.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Mitsubishi Lancer
How to replace the engine air filter of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) To safely and correctly complete the replacement of the engine air filter in your Mitsubishi Lancer, you must carefully read the following guide and …
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Mitsubishi Lancer (1995-2000 / MK 7) In this video, you can see where the fuel filter is located in the Mitsubishi Lancer EVO and how to proceed if you need to replace it. As shown, the …
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos