Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mitsubishi Lancer - Handle

Handle Mitsubishi Lancer (2007-2020 / mk 9)

Mitsubishi Lancer (2007-2020 / MK 9)
How to Replace the Handle of a Mitsubishi Lancer
Want to remove the handle of the Mitsubishi Lancer? Here's how to take the handle off from inside the car door. To disassemble the lock, you need suitable …Read all…
Posted on 21 May 2026 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
Replacing the Handle on a Mitsubishi Lancer
Open the door on which you want to replace the handle. Remove the round side clip located at the same height as the handle. Unscrew the T30 Torx screw inside …Read all…
Posted on 10 May 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (2) Battery (3) Spark plugs (2) Key (2) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (6) Light bulb (2) Headlight bulb (5) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (2) Engine (1) Clock (2) Door trim panel (1) Front bumper (2) Rear bumper (3) Brake pads (1) Shift knob (1) Fuel pump (2) Power window switch (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (6) Suspension system (1) Warning light – error code (4) Tire pressure warning light (4) Service warning light (12) Fuel cap (1) Blower motor (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos