Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Handle on a Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

Open the door on which you want to replace the handle. Remove the round side clip located at the same height as the handle.

Unscrew the T30 Torx screw inside that hole and begin disassembly: pull the long part of the handle, the part you pull to open the door, and while doing this, remove the short part. Pull the long part again, this time with force, pulling it out of the door frame first at one end (the side with the lock) and then the other.

Similarly, when fitting the new handle, insert it first on one side (the side without the lock) and then the other. Proceed in reverse until fully reassembled.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Handle of a Mitsubishi Lancer
How to Replace the Handle of a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Want to remove the handle of the Mitsubishi Lancer? Here's how to take the handle off from inside the car door. To disassemble the lock, you need sui…
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
How to Remove the Instrument Cluster on Mitsubishi Lancer
How to Remove the Instrument Cluster on Mitsubishi Lancer
Mitsubishi Lancer (1995-2000 / MK 7) Is the instrument cluster faulty? Let's see how to remove the instrument cluster from a Mitsubishi Lancer. Unscrew the securing screws of the trim ar…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos