Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on Mitsubishi Lancer

Model: Mitsubishi Lancer MK 7 - Years 1995-2000
Part: Instrument cluster

Is the instrument cluster faulty? Let's see how to remove the instrument cluster from a Mitsubishi Lancer. Unscrew the securing screws of the trim around the instrument cluster, and use a lever to remove the trim. Remove the instrument cluster and disconnect the power connectors. Install a new piece or refit the same one (repair the instrument cluster if necessary). Fit the new instrument cluster, connecting the electrical connector and the trim plastics (screw in the securing screws). Test the operation of the new instrument cluster (turn on the ignition to check the cluster).

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…
How to Reset the Service Light on a Mitsubishi Lancer?
How to Reset the Service Light on a Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) To reset the Service light on a Mitsubishi Lancer, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lights up, pre…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos