Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Mitsubishi Colt.

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Side mirror

We will briefly discover the instructions on how to disassemble and replace the external rearview mirror of the Mitsubishi Colt. First, let's open the driver's side front door and start removing the front door panel by unscrewing all the fastening screws. Then, we will unscrew the internal screws of the mirror, pulling it out from the outside, as shown in the video. At this point, we will carry out the repair or replacement of the rearview mirror, securing it properly and reassembling the door cover; finally, we will adjust the mirror.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Mitsubishi Colt
How to Replace the Front Headlight Bulb on the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this mini guide for Mitsubishi Colt owners, learn the steps to correctly replace the front headlight bulb. First, park the car on a flat surface a…
Where is the fuse box located in the 2009 Mitsubishi Colt?
Where is the fuse box located in the 2009 Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) Knowing the exact location of the fuse box in your 2009 Mitsubishi Colt is very important as it allows you to address various fuses in a targeted, sa…
Replacing the Battery of the Mitsubishi Colt
Replacing the Battery of the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) This guide outlines the steps to remove and replace the battery of the Mitsubishi Colt. First, open the bonnet by pulling the lever from inside, and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos