Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Mitsubishi Freeca

Model: Mitsubishi Freeca MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight bulb

Video tutorial

If you need to replace the headlight bulb on this vehicle, follow the instructions below to perform the replacement correctly. Once you remove the front light assembly where the bulb is located, proceed to remove the steel clip behind it that holds the bulb in place by pushing it inward.

Next, you can take out the bulb and replace it with the new one, being careful not to touch the glass with your fingers. Then, reattach the clip and reposition the rubber cover.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Tail Light Bulb on the Mitsubishi Freeca?
How to Replace the Tail Light Bulb on the Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the tail light bulb on the Mitsubishi Freeca, open the rear hatch to access the screws located next to the corresponding tail light. These…
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) In this tutorial, see how to replace the tail light bulbs in a Mitsubishi Freeca, also marketed as Adventure. First, ensure the key is not in the ign…
How to Replace the Fuel Filter on a Mitsubishi Freeca?
How to Replace the Fuel Filter on a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the fuel filter on a Mitsubishi Freeca, open the hood to access the components inside the engine bay: on the right side, you will find the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos