Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Front bumper

Today's instructions will show you how to remove and replace the front bumper of the Mitsubishi Lancer, following the steps outlined below. First, open the bonnet of the vehicle and begin removing all the plastic clips found above the front bumper and on both sides of the front wheel arches; then, unscrew the fastening screws with a 10 mm spanner and gently detach the bumper from the sides until it is completely removed, as illustrated in the video. At this point, install the new front bumper by applying the reverse procedure!

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Mitsubishi Lancer
How to remove the rear bumper of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Below we will see the steps that will allow us to disassemble and replace the rear bumper of the Mitsubishi Lancer. First, we open the rear hatch of …
How to Remove the Rear Bumper of the Mitsubishi Lancer?
How to Remove the Rear Bumper of the Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) In this tutorial, you will see how to remove the rear bumper of the Mitsubishi Lancer, a very simple task. To do this, you will need a set of screwdr…
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos