Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Rear bumper

In this tutorial, you will see how to remove the rear bumper of the Mitsubishi Lancer, a very simple task. To do this, you will need a set of screwdrivers, a 10mm socket wrench, and a clip removal tool. Start by removing the clips located at the rear of the wheel arches, then unscrew the two corresponding bolts. Next, move to the lower area of the bumper, where you will remove the additional clips. Finally, unscrew the accessible bolts by opening the tailgate and unclip the bumper from the frame, starting from one of the two sides.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Mitsubishi Lancer
How to Remove the Rear Bumper of a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Below are the steps to remove and replace the rear bumper of a Mitsubishi Lancer. First, open the boot and start unscrewing all the fixing screws fou…
How to Remove the Front Bumper of the Mitsubishi Lancer
How to Remove the Front Bumper of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Today's instructions will show you how to remove and replace the front bumper of the Mitsubishi Lancer, following the steps outlined below. First, op…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
Mitsubishi Lancer (2000-2006 / MK 8) To remove the rear bumper, start by opening the boot and removing the rear lights (there are two fixing screws along the inner edge); disconnect the …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos