Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Front Bumper and Headlight

Model: Mitsubishi Lancer MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Front bumper

See other generations:
Video tutorial

To dismantle the front bumper, start by opening the bonnet and unscrewing the bolts that secure the bumper to the grille; then remove the caps near the lower grilles and unscrew the bolts underneath. Next, move on to the bolts located along the wheel arch, under the wing.

Once the bumper is free from the various fixing points, pull it forward and remove it from its location. Continue by unscrewing the fixing bolts of the headlights, disconnect the connectors, and remove them from their location; unscrew the fixing screw of the protective cap of the bulb holder, remove the cap, and then the bulb.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Mitsubishi Lancer
How to Remove the Front Bumper of the Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Today's instructions will show you how to remove and replace the front bumper of the Mitsubishi Lancer, following the steps outlined below. First, op…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
Mitsubishi Lancer (2000-2006 / MK 8) To remove the rear bumper, start by opening the boot and removing the rear lights (there are two fixing screws along the inner edge); disconnect the …
How to replace the headlight bulb in the 2008 Mitsubishi Lancer
How to replace the headlight bulb in the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) Replacing the headlight bulb in your 2008 Mitsubishi Lancer is undoubtedly one of the simplest and safest DIY operations to perform. With the followi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos